- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SV10-47D — Spool-Type, 4-Way, 3-Position, "Motor Spool"
Selection guide - similar valves.|
PDF file of this page.
STP file for SV10-47D.
Request a quote.
A solenoid-operated, 4-way, 3-position, direct-acting, motor spool, screw-in hydraulic cartridge valve.
When de-energized, the SV10-47D blocks flow to 3, while allowing flow from
When coil S1 is energized, flow is allowed from
flow is allowed from
ratios, the higher return flow should be directed to port 2.
NOTE: While 1 may be fully pressurized, it is not intended for use as the valve’s inlet.
Operation of Manual Override Option: To override, push the knurled button to activate the
coil #2 (S2) function, or pull the knob to activate the coil #1 (S1) function.
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Efficient wet-armature construction.
• All ports may be fully pressurized.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Industry common cavity.
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 390 bar (5700 psi)
Flow: Up to 23 lpm (6 gpm)
NOTE: Consult factory if operating flow above 22.7 lpm (6 gpm) is with oil
viscosity over 420 cSt and/or valve is operated continuously (100% duty cycle)
Internal Leakage: 328 cc/minute (20 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20° C: Standard Coil: 1.67 A at 12 Vdc;
0.18 A at 115 Vac (full wave rectified).
E‑Coil: 1.7 A at 12 Vdc; 0.85 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1_4 w; Cavity Tool: CT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-MMM; See page 8.650.1
Coil Nut: Part No. 7004400; Manual Override Coil Nut: Part No. 4528180
Coil Spacer: Std. D-Coil Spacer Part No. 7009280; E‑Coil Spacer Part No. 4539700;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
in the Coil Termination To Order section
Cartridge: Weight: 0.30 kg (0.65 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.
Standard Ported Body: Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010.1_4 w.
Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.
E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV10-47D.||Request a quote.|