Solenoid-Operated On/Off Valve

SV10-57C — Spool-Type, 5-Way, 3-Position, with Load Sense
   Selection guide - similar valves.
  PDF file of this page.
  STP file for SV10-57C.
  Request a quote.

SV10-57C Valve

SYMBOL:
SV10-57C Valve symbol		 DESCRIPTION
A solenoid-operated, 5-way, 3-position, spool-type, screw-in hydraulic cartridge valve with integral load sense port.

OPERATION
When de-energized, the SV10-57C blocks flow to all ports. When coil S1 is energized, flow is allowed from 5 to 2, and from 4 to 3. When coil S2 is energized, flow is allowed from 5 to 4, and from 2 to 3. Load sense is connected to port 5 when the spool is in shifted positions.

FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.

RATINGS
Operating Pressure: 247 bar (3625 psi) with standard Buna N seals
Flow: Up to 20 lpm (4 gpm)
Internal Leakage: 164 cc/minute (10 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna N seals;
   -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20° C: Standard Coil: 1.67 A at 12 Vdc;
   0.18 A at 115 Vac (full wave rectified).
   E‑Coil: 1.6 A at 12 Vdc; 0.8 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-5; See page 9.110.1_5 w
Cavity Tool: CT10-5xx; See page 8.600.1
Seal Kit: SK10-5x-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std. D-Coil Spacer Part No. 7009280; E‑Coil Spacer Part No. 4539700;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
in the Coil Termination To Order section

PERFORMANCE:

SV10-57C Valve Performance Chart		   DIMENSIONS:

SV10-57C Valve Dimensions

MATERIALS:

Cartridge: Weight: 0.36 kg (0.80 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.

Standard Ported Body: Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010.1_5 w.

Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.		   ORDERING CHART:

SV10-57C Ordering Chart

Selection guide - similar valves.
 PDF file of this page. STP file for SV10-57C. Request a quote.