Solenoid-Operated On/Off Valve

SV08-58C — Spool-Type, 5-Way, 3-Position, with Load Sense
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SV08-58C.
  Request a quote.

SV08-58C Valve

SV08-58C Valve symbol
A solenoid-operated, 5-way, 3-position, direct-acting, spool-type, screw-in hydraulic cartridge valve with integral load sense port.

When de-energized, the SV08-58C blocks flow between all work ports, and load sense at port 1 is vented to 3. When coil S1 is energized, flow is allowed from 5 to 2, and from 4 to 3. When coil S2 is energized, flow is allowed from 5 to 4 and from 2 to 3. Load sense at port 1 is connected to port 5 when spool is in the shifted positions.

• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Optional waterproof E‑Coils rated up to IP69K.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Compact size.

Operating Pressure: 207 bar (3000 psi)
Proof Pressure: 345 bar (5000 psi)
Flow: Up to 13 lpm (3.5 gpm)
Internal Leakage: 197 cc/minute (12 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
  -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals;
  -54 to 104 °C (-65 to 225 °F) with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20° C: Standard Coil: 1.2 A at 12 Vdc;
  0.13 A at 115 Vac (full wave rectified).
  E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-5; See page 9.108.1_5 w
Cavity Tool: CT08-5xx; See page 8.600.1
Seal Kit: SK08-5x-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std D-Coil Spacer Part No. 7012940; E‑Coil Spacer Part No. 4534720;
  If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
  in the Coil Termination To Order section


SV08-58C performance graphs


SV08-58C Valve Dimensions


Cartridge: Weight: 0.15 kg (0.34 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.

Standard Ported Body: Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_5 w.

Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.

E‑Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.

SV08-58C Ordering Chart 10-size E‑Coil Manual Override options

Selection guide - similar valves.
PDF file of this page. STP file for SV08-58C. Request a quote.