- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SV10-58C — Spool-Type, 5-Way, 3-Position, with Load Sense
Selection guide - similar valves.|
PDF file of this page.
STP file for SV08-58C.
Request a quote.
A solenoid-operated, 5-way, 3-position, direct-acting, spool-type, screw-in hydraulic cartridge valve with integral load sense port.
When de-energized, the SV10-58C blocks flow between all work ports, and load sense at port 1 is vented to 3. When coil S1 is energized, flow is allowed from
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Optional waterproof E‑Coils rated up to IP69K.
• Optional manual override.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
Operating Pressure: 250 bar (3625 psi)
Flow: Up to 30.3 lpm (8 gpm)
Internal Leakage: 164 cc/minute (10 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20° C: Standard Coil: 1.67 A at 12 Vdc;
0.18 A at 115 Vac (full wave rectified).
E‑Coil: 1.6 A at 12 Vdc; 0.8 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
Installation: No restrictions; See page 9.020.1
Cavity: VC10-5; See page 9.110.1_5 w
Cavity Tool: CT10-5xx; See page 8.600.1
Seal Kit: SK10-5x-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std. D-Coil Spacer Part No. 7009280; E‑Coil Spacer Part No. 4539700;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
in the Coil Termination To Order section
Cartridge: Weight: 0.35 kg (0.76 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.
Standard Ported Body: Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010.1_5 w.
Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.
E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV10-58C.||Request a quote.|