Solenoid-Operated On/Off Valve

SV98-T39 — Spool-Type, 2-Position, 3-Way, Drop-in
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SV98-T39.
  Request a quote.

SV98-T39 Valve

SV98-T39 Valve symbol
An economical drop-in-style, direct-acting, balanced spool, two-position, three-way, directional
control valve. It is well suited for use in specialized low-pressure pilot systems or power shift
transmission control.

When de-energized, the SV98-T39 allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge’s spool shifts to open from 3 to 2, while blocking flow out 1. Pressure at 1 (tank) should not exceed 3.4 bar (50 psi).
NOTE: The coil is an integral part of the valve and is not serviceable.

• Economical drop-in style.
• Integral waterproof coil standard; see page 3.400.1_pdf for a description of tests
   conducted to verify coil waterproofing.
• 12 Vdc or 24 Vdc coils.
• Several push-on termination options.

Operating Pressure: 45 bar (650 psi)
Flow: Up to 30 lpm (8 gpm)
Internal Leakage: 60 ml/minute (3.7 cu. in./minute) maximum
Temperature: -40 to 149 °C (-40 to 300 °F) with HBNR seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
   at flow rating: Pull-in: 50 ms Drop-out: 30 ms
Initial Coil Current Draw at 20 °C: 1.68 A at 12 Vdc
Minimum Pull-in Voltage: 85% of nominal at 45 bar (650 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: Flange Mount
Flange Mounting Screws: M5 x 8; Part no. 4000039 (not provided with valve)
Cavity: VCT001; See page 9.111.1_Drp-in
Cavity Tool: CT-T001R0-x-G; See page 8.600.1
Seal Kit: SK98-T39X; See page 8.650.1


SV98-T39 Performance Chart

SV98-T39 Valve Dimensions


Cartridge: Weight: 0.23 kg (0.5 lb); Steel with hardened work surfaces. Zinc-Nickel plated exposed surfaces; HNBR O‑rings standard. Coil is encapsulated, class H high-temperature magnet wire, with zinc-plated shell.

Standard Ported Test Body: Weight: 0.11 kg (0.25 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi);
See page 8.010.1_3 w.

Mounting Screws: Must be ordered separately; Part no. 4000039

SV98-T39 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for SV98-T39. Request a quote.