Solenoid-Operated On/Off Valve

SV90-G40R — Spool, 4-Way, 2-Position, Drop-In-Style
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

SV90-G40R Valve

SV90-G40R Valve symbol
A direct-acting, spool-type, two-position, four-way, directional control valve. It is a drop-in,
flange-mounted, cartridge-type valve for use with general purpose hydraulic fluids. The coil
is an integral part of the valve and is not serviceable.

When de-energized, the SV90-G40R allows flow from 3 to 4 and from 2 to 1. When energized,
the spool shifts to allow flow from 3 to 2 and from 4 to 1.

• Bi-directional operation.
• Reduced leakage.
• Low pressure drop
• Economical drop-in style.
• Fast response.
• Corrosion-resistant plating.
• Inlet port screen option for additional resistance to contamination.
• Higher flow capacity at lower temperatures.
• Integral waterproof coil standard.
   See page 3.400.1 for a description of tests conducted to verify coil waterproofing.
• Coil voltage range from 10 to 28 VDC.
• Top-mounted coil with several push-on termination options.
• Round flange with optional mounting plates provides more options for orientation.
• Retrofit mounting options also available.

Operating Pressure: 45 bar (650 psi) all ports
Proof Pressure: 54 bar (780 psi) at port 1; 207 bar (3000 psi) at ports 2 and 3
Burst Pressure: 165 bar (2400 psi) - all ports pressurized; 275 bar (4000 psi)
   - ports 2 and 3 pressurized
Flow: 30 lpm (8 gpm)
Internal Leakage: 120 ml/minute (7.3 cu. in./minute) at 45 bar (650 psi)
Cycle Life: 10 million cycles
Temperature: -40 to 149 °C (-40 to 300 °F) with HBNR seals
   -26 to 204 °C (-15 to 400 °F) with fluorocarbon seals
Ambient Temperature: -40 to 120 °C (-40 to 248 °F)
Coil Duty Rating: Continuous from 75% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
   at flow rating: Pull-in: 30 ms Drop-out: 30 ms
Valve Inductance: 65 mH (10V), 98 mH (12V), 146 mH (14V), 273 mH (20V),
   418 mH (24V), 620 mH (28V)
Environmental Rating: IP69k. 1000-hour salt spray per ASTM B117.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: Flange Mount. Standard mounting configuration shown. Two- and
   three-valve mounting plate options are also available. Retrofit mounting options also available.
   Part numbers for body, flange, and mounting screws will differ. See page 8.525.1
Flange Mounting Plate: Part No. 4595096 (sold separately)
Mounting Screws: M5 x 0.8 x 12 mm long; Part No. 4002609 (sold separately)
Mounting Screw Torque: 2.2 to 3.0 ft.lbs. (3 to 4 Nm)
Cavity: VC-G026
Cavity Tool: CT-G026X-X-G; See page 8.600.1
Seal Kit: SK-G026-X; See page 8.650.1




SV90-G40R Valve Performance Chart



SV90-G40R  Dimension Drawing



Cartridge: Weight: 0.32 kg (0.70 lb) Steel with hardened work surfaces. Zinc-Nickel plated exposed surfaces. HNBR O-rings standard. Class N high-temperature magnet wire, with zinc-nickel plated shell.

Standard Ported Body:
Weight: 0.63 kg (1.39 lb) Anodized high-strength aluminum alloy, rated to 207 bar (3000 psi). Part No. 71610X0.
See page 8.010.1.
Note: Retrofit G3 line bodies and mounting plates are also available. Part numbers will differ.
See page 8.500.5 or contact HydraForce application engineering for details.

Mounting Plate: Must be ordered separately:
Part No. 4595096

Mounting Screws: Must be ordered separately: Part No. 4002609



SV90-G40R Ordering Chart