- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SVRV12-26F — Spool, 2-Way, Normally Open, with
Selection guide - similar valves.|
PDF file of this page.
Request a quote.
U.S. Patent 7,137,406
A solenoid-operated, 2-way, normally open, spool-type, screw-in hydraulic cartridge valve with pressure relief.
When the coil is activated, the pilot closes the drain flow and the spool closes
• Continuous-duty rated coil.
• Hardened spool and cage for long life.
• Cartridges are voltage interchangeable.
• Efficient wet-armature construction.
• Optional waterproof E‑Coils rated up to IP69K.
• Industry common cavity.
Operating Pressure: 297 bar (4300 psi)
Proof Pressure: 345 bar (5000 psi)
Flow: Up to 189 lpm (50 gpm)
Relief Pressure Settings: defined as pressure evident at 7.57 lpm (2 gpm):
Reseat Pressure: 80% of relief pressure setting
Pressure Drop: 10.3 bar (150 psi) at 89.3 lpm (50 gpm)
Pilot Flow & Leakage at 80% of relief pressure setting: 350 ml/minute maximum
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals;
-54 to 104 °C (-65 to 225 °F) with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Pull-in A: 1.14 A maximum
Drop-out A: 0.08 A minimum,
defined as relief pressure returning to pressure drop across valve
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
Installation: No restrictions; See page 9.020.1
Cavity: VC12-2; See page 9.112.1_2 w
Cavity Tool: CT12-2xx See page 8.600.1
Seal Kit: SK12-2x-B; See page 8.650.1
Coil Nut: Part No. 7004420
Cartridge: Weight: 0.25 kg (0.56 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.
Standard Ported Body:
Weight: 0.57 kg (1.25 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.012.1_2 w.
Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.
E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|